Deny Willy Junaidy, S.Sn.,MT.,Ph.D.

 

Name : Deny Willy Junaidy, Ph.D.
Research Group : Manusia dan Ruang Interior
Faculty : Fakultas Senirupa dan Desain
Rank : 3C

 

Education

PhD Creative Design Cognition, Japan Advanced Institute of Science and Technology (JAIST) *(Best Student Award) JAPAN 2014
Non-Degree Scientific Writing Course, University of California, Davis USA 2012
Non-degree Research Student, Department of Environment and Heritage DesignKyushu University (JAPAN) JAPAN 2010-2011
M.Sc Architecture, Bandung Institute of Technology INDONESIA 2003
B.Des Interior Design, Bandung Institute of Technology INDONESIA 1999

INTERNATIONAL RESEARCH, FELLOWSHIP, WORK

Visiting Researcher, Center for Ubiquitous Computing, ITEE, University of Oulu FINLAND 2018
Invited Speaker, JAIST World Conference JAPAN 2018
Program Coordinator, Interior Architecture Department, Faculty of Architecture & Ekistics, Universiti Malaysia Kelantan MALAYSIA 2016-2018
Research Member, Knowledge Transfer Program – Flagship Industry, Universiti Malaysia Kelantan, Ministry of Education, Malaysia (MOE), Malaysian Timber Industry Board (MTIB) MALAYSIA 2016-2017
Visiting Researcher, Buckinghamshire New University ENGLAND 2014
Participant, Workshop on Data Mining: Getting the most from Ethnographic Research (Chulalongkorn University, Thailand) THAILAND 2012
GRA & GTA, Research Promotion Award, Japan Advanced Institute of Science and Technology (JAIST) JAPAN 2011-2014
Principal Investigator, Hakuho Research Grant JAPAN 2013-2014
Research Assistant, STEP A – DENSO Corporation, Japan Science Technology Agency JAPAN 2012
Participant, SMEs Development for Developing Countries

(Ministry of Commerce, China)

CHINA 2010
Project Management & Leadership for Climate Change (Asia Europe Foundation, British Council THAILAND 2009
IATSS Fellow, Honda JAPAN 2009
Supervise Team for Interior Design and Decoration Works of Passenger Vessel Hull No. S.664, Germany (Jos L. Meyer GmbH, Indonesia Directorate General of the Sea Transportation) GERMANY 2007

 

REVIEW BOARDS AND SCIENTIFIC COMMITTEE FOR HGHLY REPUTABLE INTERNATIONAL CONFERENCES AND JOURNALS (SCOPUS INDEXED)

  • Taylor & Francis’ International Journal of Design Creativity and Innovation (IJDCI), https://www.tandfonline.com/loi/tdci20
  • The Design Society’s International Conference on Engineering Design (ICED), http://iced17.org/wp-content/uploads/2017/06/ICED17-Scientific-Committee.pdf
  • The ACM-SIGCHI Creativity & Cognition (C&C) Conference, http://cc.acm.org/2017/
  • The Design Society’s SIG International Conference on Design Creativity (ICDC), http://www.icdc2018.org.uk/programme/scientific-committee/
  • Journal SEARCH, Taylor’s University, Malaysia, http://search.taylors.edu.my
  • Journal of the National Academy of Inventors (NAI) (USA), http://academyofinventors.org

National

  • Journal of Visual Art and Design, Bandung Institute of Technology (ITB)
  • Journal VISUAL, University of Tarumanegara
  • The Network of African Designers NAD-KIDEC: Kumasi International Design Conference

 

RESEARCH INTEREST:

Theory of creative and design cognition; rattan & bamboo design

e:  denywilly@itb.ac.id

e:  willydeny@gmail.com

 

Scopus              :  https://www.scopus.com/authid/detail.uri?authorId=56099830900

Researchgate  :  https://www.researchgate.net/profile/Deny_Junaidy

Gscholar           :  https://scholar.google.co.id/citations?user=oVi2C28AAAAJ&hl=en

Academia         :  https://itb-id.academia.edu/DenyWillyJunaidy

SintaID              :  6103856

Blogs                  :  https://apikayu.wordpress.com

Web                    :  bit.ly/denywilly

 

PROJECT

  • Visiting Researcher at Center for Ubiquitous Computing, ITEE, University of Oulu, (FINLAND), Affective Computing for Interior Spatial User’s Emotion Using Associative Concept Network, (International Reearch Grant ITB 2018)
  • Visiting Researcher at Buckinghamshire New University (ENGLAND), Capturing Characteristics of the Conceptual Ideation Process of Master Craftspersons: A comparative study of rural craft practitioners in Indonesia and in the UK. (International Reearch Grant ITB 2014)
  • Capturing Visitor’s Learning-Space Experience in Knowledge-Based Tourism Destination (P3MI-ITB Grant, 2018)
  • Design experiment on Visual-Thinking of Concept Ideation of Congenitally Blind Individuals (ITB Research Excellence, Research Center for Cultural Product and Environment – Institute of Research and Community Service (LPPM-ITB)
  • Design Prototype for Commercial Commodity Sector: Rattan Material, Knowledge Transfer Programme (KTP) – FLAGSHIP INDUSTRY, Ministry of Education, Malaysia; Malaysian Timber Industry Board
  • Bamboo Panel Furnitures (Year 2) (ITB Decentralized Research Grant – Multi Years)
  • Bamboo Panel Furnitures (Year I) (ITB Decentralized Research Grant – Multi Years)
  • R&D on Kinetic Rattan Toys, (ITB Research Excellence, Research Center for Cultural and Environmental Products/LPPM ITB, The Association for Advancement of Small Business (PUPUK))
  • Woven Bamboo Contoured for Interior Accessories,
  • Dissemination Design and Technology for Society (DPTM), (Ministry of Research, Technology and Higher Education)
  • Hand-craft Product Made from Injection Method of Recycled Plastic Waste, (ITB Research Excellence, Research Center for Cultural Product and Environment -Institute of Research and Community Service (LPPM-ITB)
  • Gelaga Fibre (Hypolitrum Nemorum) for Furniture Product Finishing Treatment, (ITB Research Excellence, Research Center for Cultural Product and Environment -Institute of Research and Community Service (LPPM-ITB)
  • Scramble Knitting as A New Method for Rattan Product Design Development of Small Industry, (ITB Research Excellence, Research Center for Cultural Product and Environment – Institute for Research and Community Service (LPPM-ITB),
  • Bamboo Design Center: Strategy Towards Commercialization, (National Strategic Research Grant, Department of Higher Education – LPPM ITB), Veneer-boo: Developing New Bamboo Contemporary Craft (National Strategic Research Grant, Department of Higher Education – LPPM ITB)
  • Veneer Boo (Bamboo Veneer Material) : Machine and Product Design Development, (ITB Research Excellence, Research Center for Cultural Product and Environment -Institute of Research and Community Service (LPPM-ITB)
  • Exploration of Lighting Effects on Bamboo Structure Modification, (Man and Interior Design Research Group, Research Center for Cultural Product and Environment – Institute of Research and Community Service (LPPM-ITB)
  • Development of Stripping Machine for Snake Fruit/Salak Trunk (Salacca), (ITB Research Excellence, Research Center for Cultural Product and Environment -Institute of Research and Community Service (LPPM-ITB)
  • Crisis and Regeneration: Indonesian Bamboo Artisans (West Java), (ITB Research Excellence, Research Center for Cultural Product and Environment -Institute of Research and Community Service (LPPM-ITB)
  • Stripping Machine : Upgrading the Production Capacity of Snake Fruit/Salak Trunk Handicraft Products: Economic Empowerment to Salak (Salacca Edulis) Farmer, Village of Cineam, Tasikmalaya, (Incentive Program, Ministry of Research and Technology, Apikayu Foundation)
  • Utilization of Snake Fruit/SalakTrunk (Salacca) for Interior Product and Accecories, (ITB Research Excellence, Research Center for Cultural Product and Environment -Institute of Research and Community Service (LPPM-ITB)
  • Design Development of Smart Toy for Early Education. (Department of National Education, Institute of Research and Community Empowerment /LPPM ITB)
  • Utilization of Snake Fruit /SalakTrunk (Salacca) for Interior Product and Accessories: Economic Empowerment to Salak Farmer, Cineam Village, Tasikmalaya.
  • Vucer Program (Directorate of Higher Education, Institute of Research and Community Empowerment/LPPM ITB)
  • Utilization of Snake Fruit Trunk (Salacca) for Interior Product Accecories: Economic Empowerment to Salak Farmer, Cineam Village, Tasikmalaya. (IPTEKDA IX, Indonesian Institute for Science (LIPI), Apikayu Foundation, Institute of Research and Community Empowerment/LPPM ITB)
  • Design Education Orientation of Students Entrepreneurship : Searching Resistance and Stimulus.                                                                                                                                            (Research Group – Institute of Research and Community Service (LPPM-ITB)
  • Developing A Smart Toy for Early Childhood Education in Slump Area, Bandung City. Indonesian Directorate of External Education and Youth.
  • Utilization of Kina Timber Waste as Raw Material of Craft Product to Support Unemploy Society around Plantation Area, Bukit Tunggul, Subang, West Java. (IPTEKDA IV, Indonesian Institute for Science/LIPI, Institute of Research and Community Service (LPPM-ITB))
  • Developing a Home Industry of Cardboard Paper Furniture, IPTEKDA VI – The Indonesian Institute for Science (LIPI)
  • Cardboard Furniture Design for Dormitary Students, (DPI – Institute of Research and Community Service (LPPM-ITB))
  • Empowering Small Industry Producing Interior-Craft Element with Brass and Wood Material – Vucer Multi Years/VMT Program, (Directorate of Higher Education, Institute of Research and Community Service (LPPM-ITB))

 

2018,  Summer School, Placesense 2.0, WCU ITB.

2018,  Rattan Furniture Design Workshop, Universitas Tarumanegara

2017,  5th Rattan Design Workshop, (Ministry of Industry, Indonesian Rattan Innovation Center (PIRNAS)

2017,  Team of Rattan Design Workshop – 5thKnowledge Transfer Programme (KTP FTKW-UMK) – FLAGSHIP INDUSTRY, Ministry of Education,

Malaysia (MOE), Malaysian Timber Industry Board (MTIB)

2016,  Team of Rattan Design Workshop – 4th Knowledge Transfer Programme (KTP FTKW-UMK) – FLAGSHIP INDUSTRY, Ministry of Education,

Malaysia (MOE), Malaysian Timber Industry Board (MTIB)

2016,  Team of Rattan Design Workshop – 3rd (Putrajaya, KL)

Knowledge Transfer Programme (KTP FTKW-UMK) – FLAGSHIP INDUSTRY

Ministry of Education, Malaysia (MOE), Malaysian Timber Industry Board (MTIB)

2016,  Designer Dispatch Service (DDS) (Rattan R&D)

Ministry of Trade, Indonesia

2016,  Rattan Furniture Workshop (Cirebon)

Office of Industry, West Java Province

2016, Wooden Craft Design Workshop (Sumedang)

Office of Industry, Sumedang

2016, Weaving Design Workshop (Palangkaraya)

Ministry of Industry

2015, Rattan Toys Workshop (Palangkaraya)

Ministry of Industry

2015, Rattan Furniture Design Workshop (Surabaya)

(Ministry of Industry, Indonesian Rattan Innovation Center (PIRNAS), Bali Creative Industry Center)

2015, Experts Meeting on Eco-Friendly Rattan Product Indonesia

(PROSPECT Program, The Association for Advancement of Small Business  (PUPUK), European Union (EU) through SWITCH-Asia program)

2015, Rattan Craft Workshop on 3rd ITS International Conference on Creative Industrie /ICCI 2015 (Bali)

(Ministry of Industry, Indonesian Rattan Innovation Center (PIRNAS), ITS)

2015, Bamboo Press-Laminated Design Training

(Industry and Trade Office, Indonesia and Ternate)

2015, Design Training for Rattan Craftsmen

(Industry and Trade Office, Palangkaraya)

2015, Design Expert Team for Model Capacity Building for Efficient and Sustainable

Utilization of Bamboo Resources in Indonesia, Bali – PD 600/11 Rev.1 (I)

(International Tropical Timber Organization (ITTO) & Center of  Forest Productivity, Ministry of  Forestry, Research Center for

Cultural Product and Environment – Institute of Research and Community Service (LPPM))

2015, Digital Database Design of Rattan Design and Innovation

Center for Rattan Innovation (PIRNAS), Indonesia, Ministry of Industry

2014, Training for Traditional Craft Design and Packaging, Wonogiri

(Ministry of Research,Technology and Higher Education – SPEKLOK)

2014, Training for Low-Cost Furniture Home Industry IV, Sumedang

(Agro Industry and Trade Office,West Java Province)

2013, 8th Research Grant for Educational Practice

Research funding: The Hakuho Foundation, Japan

Title: A Study on Children’s Formative-Play Culture: Field Study in Indonesia and Japanese Handicraft        Villages

2012, STEP A: Research funding: DENSO Corporation, Japan Science Technology Agency (JST)

Title: An Investigation of Vehicle Interface Operation Comfort,

Role Research Assistant

2012, Design Training for Rattan Craft and Furniture Craftspersons, Cirebon

(Agro Industry and Trade Office,West Java Province)

2011, Design Training for Low-Cost Furniture Home Industry I, Sumedang.

(Agro Industry and Trade Office,West Java Province)

2011  Design Assistance for Furniture Design Practitioners, Semarang

(Directorate General of Agriculture and Forestry Industries)

2011, Design Assistance for Furniture Design Practitioners, Surabaya

(Directorate General of Agriculture and Forestry Industries)

2011, Design Training for Mendong-Woven MatInstruktur, Tasikmalaya

(Office of Industry)

2011, Design Introduction for Micro and Small Industry, Gorontalo

(APINDO, NHO Norway)

2011, Design Introduction for Micro and Small Industry, Makassar

(APINDO, NHO Norway)

2010, Training for Creative Industry Youths (10 Provinces)

(Department of Trades, PT. Rensa Kerta Mukti)

2010, Wood Carving Design & Development ToT Training

MARA Malaysia, LPPM ITB, PPPPTK Art & Culture, Yogyakarta

2009, Handicraft Entrepreneurship Start-up Supporting Program (WUB) in 10 Provinces

(Depperin, PT. Padmaduta Cipta)

2009,  Development of Design Development Organization, Cirebon

Industry Department

2009,  Pandanus Handicraft Design Development,Tasikmalaya

(Industry and Trade Office, Jabar)

2009,  Design Expert Team

Design Assistance for Micro-Small Scaled of Rattan Furniture Design, Palu

(Industry and Trade Office, City of Palu)

2009,  Design Clinics for Women Leaders of SMEs in Kupang, NTT

(NHO Norway, APINDO)

2009,  Design Clinics for Women Leaders of SMEs in City of Palangkaraya, Kalimantan

(NHO Norwegia, APINDO)

2009,  Bamboo Weaving Handicraft Training for Women Entrepreneurs, Tegal

(NHO Norwegia, APINDO)

2009,  Design Clinics of  Micro-Small Sized Industry of Rattan Furniture Industry, Cirebon

(Industry and Trade Office, Jabar – FSRD ITB)

2009, Rattan Furniture Design Training for Micro-Small Rattan Meuble Producer, Cirebon

(Industry and Trade Office, Jabar, UPT Rattan Industry and Trade Office, Cirebon,

FSRD ITB)

2009,  Design Training of Ketak (seagrass) Handicraft for Women Entrepreneurs, Lombok

(NHO Norway, APINDO)

2008,  Management Supervision of Machine Equipments Supply for Woven Handicraft SMEs

(Indonesian Department of Industry – PT. Rensa Kerta Mukti)

2007, Training and Development Service of  Basketry Product for Small Industry (8 Provinces).

(Indonesian Department of Industry, PT.Rensa Kerta Mukti)

2007, Design Training of Tasiklamayan’s Traditional Umbrella

(Industry Official Office-Tasikmalaya)

2007, Mendong (seagrass) Woven Design and Non-Machinal Woven Ware Development, PPK-IPM Program, (Industry Official Office-Tasikmalaya,

Art & Design Research Center ITB)

2007, Design Training and Clinics : Bamboo Basketry Design

PPK-IPM Program

(Industry Office-Tasikmalaya, Art & Design Research Center ITB)

2007, Training of Exhibition Design for Industrial Office Staff.

(Art and Design Research Center ITB & Industry and Trade Office)

2007,  Design Development Training Services for Wooden Furniture Producer

(Industry Official Office-Kuningan)

2006,  Technical Assistance Training for Meuble Industry SMEs in South Bengkulu

(Industry Official Office – Manna, Bengkulu)

2006,   Training of Interior Design of Exhibition Room.

(Industry and Trade Official Office, Central Java – PSDI ITB)

2006,   Workshop on Local Contemporary Craft Development

(TechnoART Park, PPPG Yogyakarta – FSRD ITB)

2005,   Development of Appliance Autodidact Assistance Based on Multimedia

Interactive : Comprehend Mass of 3D Space for Design Students.

(Research Group – Institute of Research and Community Empowerment ITB)

2005,  Vocational Skill Trainning for Youth Group in Tamansari, Bandung.

Designing Paper and Cardboard Product/Packaging

(Indonesian Directorate of External Education and Youth, Institute of Research

and Community Empowerment/LPPM ITB, IBL, Cocacola Bottling)

2003,  Design Development and Production Technology Improvement of

Bamboo Artisan at Datarnangka Village, Sagaranten, Sukabumi.

(Industry Official Office and West Java Province, Institute of Research and

Community Empowerment/LPPM ITB)

2003,  Design Training of Indonesian Traditional Furniture

(Special Course for a Japanese Student)

(Interior Design Study Program ITB)

 

Commissioned Programmes:

  • Design Assistance for Startup Creative Industries in 10 Provinces
  • Design Training for Bamboo Weaving Craft Artisans in 10 Provinces (7 years)
  • Design Training for Traditional Natural Fibre Craft Artisans (7 years)
  • Design Training for Traditional Wood Crafts Artisans (5 years)
  • Design Training for Woman Artisans in Rural Area in 10 Provinces
  • Design Support for National Rattan Furniture Industry (7 years)
  • Vocational Skill Training for Local Youth of Craft Groups (5 Years)
  • International ToT of Traditional Wood Carving Design Development

 

Expert of Design Education Delivery in Rural Craft and Furniture Industries

Role: Designing and overseeing implementation of the program and directly involved in the design training delivery.

Appointed by:

  • Ministry of Industry, Republic of Indonesia,
  • Malay for Indigenous People’s Trust Council (MARA Malaysia),
  • The Indonesian Employers Association (in cooperation with the Confederation of Norwegian Enterprise(NHO),
  • and other private sectors.

 

Professional Interior Design Works

  • 2007, Supervise Team for Interior Design and Decoration Works of Passenger Vessel Hull No. S.664, Germany (Jos L. Meyer GmbH, Indonesia Directorate General of the Sea Transportation, GERMANY)
  • 2004, Team of Interior Design for Bank International Indonesia (BII)
  • 2003, Team of Interior Design for Sentosa International Hospital
  • 2003, Team of Interior Design for Mosque of Bank of Indonesia, (BI), Surabaya
  • 2002, Team of Interior Design for Pension Funds Office (Telkom)
  • 2000-2007, Team of Interior Design for Several Private House, Indonesia

 

PUBLICATIONS

JOURNAL
1.          Junaidy, D. W., Nagai, Y. (2017) The Characteristic of Thought of Digital       Architect. International Journal of Creative Future and Heritage (IJCFH), Vol 5, Issue 1. ISSN: 2289-4527, pp. 41-73.

2.          Junaidy, D. W., (2017). The Perspective on Innovation Design: East and West. Special Issue of Japanese Society for the Science of Design (JSSD). デザイン学研究特集号  Vol.25-1 No.97, ISSN: 0919-6803, pp-116-122

3.          Junaidy, D. W., Kaner, J., Ioras, F., Nagai, Y. (2015) Capturing characteristics of the conceptual ideation process of master craftspersons to inform design education: A comparative study of rural craft practitioners in Indonesia and in the UK. Journal of Design Research, 13(4), 395–423. (SCOPUS INDEXED)

4.          Junaidy, D. W., Nagai, Y. (2013). The in–depth cognitive levels of imagination of artisans and designers. Journal of Design Research, 11(4), 317-335. (SCOPUS INDEXED)

5.         Junaidy, D. W., Nakamori, Y., Hirata, M., Nagai, Y. (2013). Evaluation on color fabrics for comfort in healthcare interior facility. The Bulletin of Japanese Society for the Science of Design (JSSD), 60(3) 49-54.

6.         Prijatna, D. M., Junaidy, D. W. (2008) An overview of the green criteria of interior design. Design Science Journal (JID), 3(2). Pp. 111-118.

7.         Junaidy, D. W., Adhitama, G. P. (2006) Utilization of snake fruit trunk (salacca edulis) for interior accecories. Journal of Design Science (JID), 1(3) 203-212.

 

BOOK CHAPTER

1.       Larasati, D., Junaidy, D.W., Satari, T. F. C. (2017). CREATICITY: Lessons Learned from Bandung UNESCO City of Design. in Entrepreneurial Innovation in Ekistics. Creative Cities, Smart Living, Creative Urbanism, Cultural Rebranding. Bachok Ekistik Seminar 2017 (BES’17). Eds. Shuaib, A.A., Ismail, S. UMK Press. ISBN: 978-967-0955-53-7 (in press)

2.       Junaidy, D.W. (2017). Aplikasi Teknik Analisa Jaringan Konsep Asosiatif dalam Pengembangan Metode Pelatihan Desain bagi Pengrajin. In Atika Mayang Sari (ed) Indonesian Brain Gain Kumpulan Karya Diaspora Membangun Bangsa. IPB Press. Pp. 241-258. ISBN: 978-602-440-031-6

3.       Feher, K., Junaidy, D. W., Larasati, D., Kovacs, A. & Rahardjo, B. (2017) Prospects of Creative Industries and Digital Economy. Perspectives from Southeast Asia and Central Europe. In. Novak, T. (ed) Go Hungary – Go Indonesia: Understanding Economic and Business Issues. Budapest Business School, University of Applied Sciences, pp.151-172. ISBN: 978-615-5607-26-4

4.       Junaidy, D. W., (2015) Masyarakat yang Menciptakan Pengetahuan Setiap Hari. Book Chapter in Ferry Fathurokhman (ed) Notes from Ishikawa. Berbagi Inspirasi dari negeri Sakura. PPI Ishikawa. Nulis Buku Press, 2015. pp 56-61. ISBN: 978-602-3680-14-6

5.       Junaidy D.W., Nagai Y., Ihsan M. (2013) Craftsmen Versus Designers: The Difference of In-Depth Cognitive Levels at the Early Stage of Idea Generation. In: Chakrabarti A., Prakash R. (eds) ICoRD’13. Lecture Notes in Mechanical Engineering. Springer, India. ISBN: 978-81-322-1049-8

 

CONFERENCE PAPER

1.       Abdullah Al Rashid Ab. Hamid., Junaidy, D.W., Nor Hamizah Abdul Hamid, Muhamad Ezran Zainal Abdullah, Mohd Firuz Mohd Anwar, Mohd Firdaus Mohd Herrow. (2017). Rattan and Wood Furniture Industry Joint Design Training: Design Enhancement of Malaysia School Furniture. In Abstract of 4th National Conference on Knowledge Transfer (NCKT’17), 11-12 Dec, 2017, Kedah

2.       Junaidy, D.W., Nagai, Y., (2016) Mindsets of Craftsman: From Barrier to Lever. in Proceeding of Knowledge, Information and Creativity Support Systems (KICSS 2016). IEEE Xplore, pp. 75-80. BEST PAPER AWARD – (SCOPUS INDEXED)

3.       Abdullah Al Rashid Ab. Hamid., Junaidy, D.W., Nor Hamizah Abdul Hamid, Muhamad Ezran Zainal Abdullah, Mohd Firuz Mohd Anwar, Mohd Firdaus Mohd Herrow. (2016). Rattan Furniture Design-Training Delivery Towards Commercial Value of Commodity Sector. In Proceedings of 3rd National Conference on Knowledge Transfer (NCKT’16), pp. 281-288.30 Nov-1 Dec, 2016, Penang

4.       Junaidy, D.W., Nagai, Y., Ihsan, M. (2016) Craftsmen Versus Designers: The Difference of In-Depth Cognitive Levels at the Early Stage of Idea Generation. International Conference on Industrial Design. INdesignation. Bandung, 10-11 November, 2016.

5.       Nagai, Y., Junaidy, D. W., Mori, S., Taniguchi, S. (2015) A Challenge of Communication Design: Stimulating Co-Creative Play, in Proceedings of the Congress of International Association of Societies of Design Research (IASDR), Brisbane, Australia.

6.       Nagai, Y., Junaidy, D. W. (2015). Meta-contents of design creativity: Extraction of the key concepts that form the sense of design. in Proceedings of the Third International Conference on Design Creativity (3rd ICDC), Bangalore, India, January 12–15, 2015. (SCOPUS INDEXED)

7.       Junaidy, D. W., Nagai, Y., Mori, S., Taniguchi, S., Yoshida, T. (2015). Parent-child co-creative learning: collectivity and individuality in creativity. The Third International Conference on Design Creativity (3rd ICDC), Bangalore, India, January 12–15, 2015. (SCOPUS INDEXED)

8.       Junaidy, D. W., Nagai, Y., Mori, S., Taniguchi, S., Yoshida, T. (2014). Parent-child communication in stimulating co-creative play: Indonesia and Japan. The 4th Forum on Knowledge Co-Creation (FoKCs-4). Kanazawa, Japan.

9.       Junaidy, D. W., Nagai, Y. (2014, January) Co-creation educational activity for traditional craftsmen. In Abstract Book of International School on Knowledge Co-Creation (ISKCC2014), p. 22. Thailand

10.    Junaidy, D. W., Nagai, Y. (2013, August) Dialectical-belief Features in Design Education for Artisans, in Proceedings of the 5th International Congress of International Association of Societies of Design Research (IASDR), 1664-1675. Tokyo, Japan. (STUDENT RESEARCH BURSARY AWARD FROM DESIGN RESEARCH SOCIETY /DRS, UK).

11.    Georgiev, G. V., Nagai, Y., Noda, S., Junaidy, D. W & Taura, T. (2013). An investigation of vehicle interface operation comfort. In DS 75-7: Proceedings of the 19th International Conference on Engineering Design (ICED13), Korea. (SCOPUS INDEXED)

12.    Nagai, Y., Junaidy, D. W. (2013, June). Empowering cognitive fixedness. In Proceedings of the 9th ACM Conference on Creativity & Cognition (pp. 291-294). ACM. Sydney, Australia.

13.    Junaidy, D. W., Nagai, Y. (2013, June). Co-creation model for traditional artisans in the current creative environment. In Proceedings of the 9th ACM Conference on Creativity & Cognition (pp. 324-327). ACM. ACM. Sydney, Australia.

14.    Junaidy, D. W., Nagai, Y. (2013). The Imaginative Approach: Characteristics of Craft Artisans’ and Design Trainers’ In-depth Cognitive Levels During a Design Training, in Proceedings of the 2nd International Conference for Design Education Researchers (DRS CUMULUS 2013), Vol. 4, pp. 2064-2079, DRS. Oslo, Norway.

15.    Junaidy, D. W., Nagai, Y., & Ihsan, M. (2013). Craftsmen Versus Designers: The Difference of In-Depth Cognitive Levels at the Early Stage of Idea Generation. In ICoRD’13 (pp. 223-234). Springer India.

16.    Georgiev, G. V., Nagai Y., Taura, T., Noda, S. & Junaidy, D. W. (2012). Analysis of User Feelings during Interface Operation: Implications for Creative Design, in Proceedings of the 2nd International Conference on Design Creativity (ICDC2012), pp. 143-151. Glasgow, UK. (SCOPUS INDEXED)

17.    Nagai, Y., Noda, S., Georgiev, G. V., Taura, T., & Junaidy, D. W. (2012) Analysis Method Focusing on Repeated and Not Repeated Verbalizations during Human Interface Operation, in Proceedings of the 34th Annual Meeting of the Cognitive Science Society (CogSci 2012), p. 2792. Hokkaido, Japan.

18.    Junaidy, D. W., Nagai, Y., Hanan, H. (2012). Study on The Characteristic of Thought of 3D Digital Architects, in Proceedings of the 2012 International Conference on Design Research Society (DRS 2012), Vol. 4, pp. 1995-2008. Bangkok, Thailand.

19.    Larasati, D., Ihsan, M., Junaidy, D. W. (2011). Creative Economy is not for Everybody. Or is it? Lessons Learned from Creative Economy, in Proceedings of International Conference on Creative Industries (ICCI 2011). Indonesia.

20.    Larasati, D., Ihsan, Muhammad., Junaidy, D. W. (2010). Veneer-boo Products and Machine Development for SMEs in West Java, in Proceedings of Arte-Polis 3 International Conference on Creative Collaboration and the Making of Place. Indonesia.

21.    Junaidy, D.W., Anwar, M.F.M.A.,  Hamid, A.A.R.A., Naser, M.Y.M.N., Shuaib, A.A.(2017) Glue-less Bamboo Strip Panel (GBSP) for Furniture Design. Bamboo World Xploration (BWX’17). Panel Session (19-20 March 2017). Universiti Malaysia Kelantan, Jeli.

22.    Junaidy, D. W., Nagai, Y. (2013). Empowering Cognitive Fixedness: Dialectical-belief Features in Design Education for Artisans, JAIST Poster Challenge. Nomi, Japan.

23.    Junaidy, D. W., Nagai, Y. (2013). A Direction to Change Craftsmen’ Creative Cognition: The Use of Highly Metaphorical Words, in Proceeding of The 60th Annual Conference of JSSD, Vol. 60, pp. 36-37. Tsukuba, Japan.

24.    Yoshida, T., Mori, S., Taniguchi, S., Junaidy, D. W. (2013). Research on Children’s Formative Play Culture and Creativity, in Proceeding of The 60th Annual Conference of JSSD, Vol. 60, pp. 38-39. Tsukuba, Japan.

25.    Junaidy, D. W., Nagai, Y., Ihsan, M. (2012). Capturing Craftsmen’s and Designers’ Associative Concept at In-depth Level of Cognition at the Early Stage of Idea Generation, in Proceeding of Design Symposium (DS2012), pp. 245-249. Kyoto, Japan.

26.    Nagai, Y., Junaidy, D. W., Ihsan, M. (2012). A Creativity Gap in Design Training: A Case Study of Pre and Post-design and Creativity Training for Wooden Sandal Craftsmen in Tasikmalaya, Indonesia, in Proceedings of the 59th Annual Conference of JSSD. Sapporo, Japan.

MAGAZINE

1.       Junaidy, D. W. (2011). A Short History of Early Rattan Furniture Design, (A research of Dr. Andrew J. Cookson). Rattan Icon Magazine, Vol. 2.

2.       Junaidy, D. W. (November, 2008). Development Strategy for Rattan Furniture Design Industry, Rattan Icon Magazine, Vol. 3.

3.       Junaidy, D. W. (2007). Establishing A New Cluster of Small Craft Industry producing  Craft from Salak Palm Tree Trunk (Salacca) to Support Area Preservation in Salak Plantation, Cineam Village, Tasikmalaya, Indonesian Institute for Research Bulletin (LIPI).

4.       Junaidy, D. W. (2007). SMEs in Indonesia to Support Escalation of the Economical Growth, Indonesian Packaging Directory.

5.       Junaidy, D. W. (2001). Corrugated Paper Furniture, Majalah Promaris, Ministry of Research and Technology.

AWARDS

2017

2016

Finalist – (Team) Malaysian International Furniture/MIFF2018 Furniture Design Competition (FDC), MALAYSIA

Best Paper Award – KICSS 2016, Binus University, Japan Advanced Institute of Science and Technology, IEEE, Japan Creativity Society

2015 Kids Design Award – (Team of Nagai. Laboratory Research Team), JAPAN
2014 Best Student Award – Graduate School of Knowledge Science, JAIST, JAPAN
2014 Best Poster Presentation Award – JAIST Fellowship Report Presentation, JAPAN
2013 Student Research Bursary Award  –  Design Research Society (DRS), ENGLAND.
2009 Finalist  –  Youth CSR Program Award  –  Asia Institute Management, PHILIPPINES.
2009 Gold Award –  (Team)  Indonesian Good Design Selection (IGDS).
2009 Special Prize  –  D-Award for Modern Furniture Design Competition, Indonesia.
2007 2nd Prize   –  National Craft Council (DEKRANAS), Indonesia.
2006 Finalist  –  International Young Creative Entrepreneur  –  British Council, Indonesia.
2003 Young Entrepreneur Start-up Award  – Indonesia Business Links, YBI, Shell.
2002 Gold Award –  (Team) Indonesian Good Design Selection (IGDS).
2002 1st Winner – Corporate Image of the Sentosa International Hospital.
2002 1st Prize –  (Team)  Furniture Design Competition, Ministry of Industry.
2001 2nd Prize   –  Business Innovation, the State Ministry of Research and Technology.

 

AD-HOC REVIEWER AND COMMITTEE
2018

 

 

2017

 

 

 

 

2017

Reviewer

Research & Community Empowerment,

Sumatera Institute of Technology (ITERA)

Reviewer

The NAD-KIDEC 2017: Kumasi International Design Conference.

Theme: Sustainable Development Goals in Africa: The role of Indigenous Design

11th – 13th September, 2017, Kumasi, Ghana

http://www.nadkidec2017.com

Scientific Committee

The 5th International Conference on Design Creativity (ICDC2018)

University of Bath, UK

http://www.ICDC2018.org.uk

2017 Reviewer

ACM SIGCHI Conference on Creativity & Cognition 2017 (C&C)

http://cc.acm.org/2017/

2017

 

 

2017

 

Scientific Committee

The 21st International Conference on Engineering Design

The University of British Columbia

www.iced17.org

Publicity Chair

The 1st Bachok Ekistics Symposium (BES2017)

Universiti Malaysia kelantan

http://fae.umk.edu.my/index.php/en/penyelidikan-inovasi/seminar-persidangan/seminar-bes-2017

2016-recent

 

 

Reviewer

International Journal of Design Creativity and Innovation (Routledge/Taylor & Francis)

http://www.tandfonline.com/tdci

2016-recent

 

 

Editorial Board

Journal of Visual Art and Design

Bandung Institute of Technology (ITB)

http://journals.itb.ac.id/index.php/jvad/about/editorialTeam

2016

 

Jury

Rattan Furniture Design Competition/KDMR (West Java), Indonesia

Office of Ministry of Industry, West Java

2016-recent

 

Reviewer

Journal SEARCH, Taylor’s University, Malaysia

2015-recent

 

Reviewer

Journal VISUAL, University of Tarumanegara

2013

 

 

Reviewer

Proceedings of the Design, Development & Research Conference

(DDR 2013, Ghana).

2013

 

 

Organizing Committee (website Chair)

9th ACM Conference on Creativity & Cognition

(C&C 2013, Australia).

2012

 

 

Reviewer

Proceedings of the 2nd International Conference on Design Creativity

(ICDC 2012, UK)

2008

 

 

Organizing Committee

Indonesia Good Design Selection / IGDS 2008

(Indonesian Industry Department, LPPM ITB)

2011 – 2014

 

Website management

Special Interest Group/SIG Design Creativity website – the Design Society

2001 – 2018 A number of Organizing Committee, Publication Chair, Jury, etc. of

Conferences, Workshop, Furniture Exhibition in Indonesia

 

SCHOLARSHIPS
2014

2013

2013

2013

2013

2010

2000

JAIST Grant of Off-Campus Research

NEC C&C Foundation Overseas Travel Grant

Research Bursary Award, DRS, England

JAIST Foundation Research Grant

JAIST Foundation Research Grant (1st Semester)

JAIST 3D Overseas Training Grant (2nd Semester)

Ministry of Education and Culture – Overseas Postgraduate Scholarship (PhD)

Ministry of Education and Culture – Postgraduate Scholarship (Master)

 

MEMBERSHIPS IN PROFESSIONAL ORGANIZATIONS
Indonesian Alliance of Industrial and Product Designer (ADPII)

The Design Society (DS)

Design Research Society (DRS)

Japanese Society for the Science of Design  (JSSD)

Indonesian Society of Interior Designers (HDII)

 

REGISTERED INDUSTRIAL PROPERTY RIGHTS
1.       Calamy Arm Chair, Malaysian IPO, in progress. 2018

2.       No. 0026468-D; December 12, 2011 (Rattan Furniture Set)

Directorate General of Intellectual Property Rights

3.       No. 0030635-D; May 16, 2012 (Rattan Furniture Set)

Directorate General of Intellectual Property Rights

4.       No. 0030634-D; November 19, 2012 (Rattan Furniture Set)

Directorate General of Intellectual Property Rights